# Target: Elecrow Basic CrowPanel 7.0-inch V3.0 (DIS08070H, ESP32-S3-N4R8)
CONFIG_IDF_TARGET="esp32s3"

# Module memory configuration: 4 MB QIO flash + 8 MB octal PSRAM.
CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
CONFIG_ESPTOOLPY_FLASH_MODE_AUTO_DETECT=n
CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
CONFIG_SPIRAM=y
CONFIG_SPIRAM_MODE_OCT=y
CONFIG_SPIRAM_SPEED_80M=y
CONFIG_SPIRAM_BOOT_INIT=y
CONFIG_SPIRAM_USE_CAPS_ALLOC=y
CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=16384
CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=32768
CONFIG_SPIRAM_FETCH_INSTRUCTIONS=y
CONFIG_SPIRAM_RODATA=y

# The RGB panel is bandwidth-sensitive when its frame buffer lives in PSRAM.
CONFIG_ESP32S3_DATA_CACHE_LINE_64B=y
CONFIG_LCD_RGB_RESTART_IN_VSYNC=y
CONFIG_COMPILER_OPTIMIZATION_PERF=y
CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240=y
CONFIG_FREERTOS_HZ=1000
CONFIG_ESP_MAIN_TASK_STACK_SIZE=6144

# GPIO43 is used by the radar TX path. Keep the application console off UART0.
# The ROM downloader still works through the onboard CH340C.
CONFIG_ESP_CONSOLE_NONE=y
CONFIG_ESP_CONSOLE_SECONDARY_NONE=y
CONFIG_BOOTLOADER_LOG_LEVEL_NONE=y
CONFIG_LOG_DEFAULT_LEVEL_WARN=y

# LVGL 8 RGB565 configuration and only the fonts used by this UI.
CONFIG_LV_COLOR_DEPTH_16=y
CONFIG_LV_COLOR_16_SWAP=n
# CONFIG_LV_BUILD_EXAMPLES is not set
CONFIG_LV_FONT_MONTSERRAT_12=y
CONFIG_LV_FONT_MONTSERRAT_14=y
CONFIG_LV_FONT_MONTSERRAT_16=y
CONFIG_LV_FONT_MONTSERRAT_20=y
CONFIG_LV_FONT_MONTSERRAT_24=y
CONFIG_LV_FONT_MONTSERRAT_28=y
CONFIG_LV_FONT_MONTSERRAT_32=y
CONFIG_LV_FONT_MONTSERRAT_40=y