#pragma once

#include "driver/gpio.h"

// This firmware intentionally targets the Basic CrowPanel V3.0. V1/V2 route
// the touch interrupt through GPIO38 and are not pin-compatible with Radick.
#define RADICK_LCD_H_RES            800
#define RADICK_LCD_V_RES            480

#define RADICK_LCD_DE_GPIO          GPIO_NUM_41
#define RADICK_LCD_VSYNC_GPIO       GPIO_NUM_40
#define RADICK_LCD_HSYNC_GPIO       GPIO_NUM_39
#define RADICK_LCD_PCLK_GPIO        GPIO_NUM_0
#define RADICK_LCD_BACKLIGHT_GPIO   GPIO_NUM_2

#define RADICK_TOUCH_SDA_GPIO       GPIO_NUM_19
#define RADICK_TOUCH_SCL_GPIO       GPIO_NUM_20
#define RADICK_PCA9557_ADDRESS      0x18
#define RADICK_GT911_ADDRESS        0x5D
#define RADICK_GT911_ALT_ADDRESS    0x14

// Safer split-connector wiring for V3:
//   RD-03D TX -> GPIO_D pin 1 (GPIO38)
//   RD-03D RX <- UART pin 2 (GPIO43)
// This avoids connecting the radar TX output to GPIO44, where the onboard
// CH340C TX output is already electrically connected.
#define RADICK_RADAR_RX_GPIO        GPIO_NUM_38
#define RADICK_RADAR_TX_GPIO        GPIO_NUM_43
#define RADICK_RADAR_UART_NUM       UART_NUM_1
#define RADICK_RADAR_BAUD_RATE      256000

#define RADICK_AUDIO_DOUT_GPIO      GPIO_NUM_17
#define RADICK_AUDIO_LRCLK_GPIO     GPIO_NUM_18
#define RADICK_AUDIO_BCLK_GPIO      GPIO_NUM_42

#define RADICK_UI_REFRESH_MS        50U
#define RADICK_SENSOR_OFFLINE_MS    1500U
#define RADICK_TARGET_EXPIRE_MS     650U
#define RADICK_AUTO_DIM_MS          60000U